Fix it Angel [ DIY Auto Maintenance Care ]

LABOR TIME: 2000-2006 BMW X5 FRONT Driver-Side/Passenger-side Window Regulator and Motor

2000 2001 20002 2003 2004 2005 2006 BMW X5

FRONT Driver-Side/Passenger-side Window Regulator and Motor

Labor Time: One Side 2.5
Both Sides 4.6

Driver-side Window motor and regulator https://goo.gl/w2zU2t

Passenger-side Window motor and regulator https://goo.gl/PdPE4N

LABOR TIME: 2007-2011 Toyota Camry Motor Mounts and Trans Mount

2007 2008 2009 2010 2011 Toyota Camry, 4 cylinder, 2.5L (2AR-FE)

Complete Mount Set https://goo.gl/1xU9y2

Labor Times:

Dogbone Mount (torque mount): 0.3 https://goo.gl/RmwMe5

Front Mount: 0.7

Rear Mount: 0.8

Trans Mount: 1.0

[easy follow] Rear DOOR latch handle Replacement Toyota SIENNA√ fix it angel

1998 1999 2000 2001 2002 2003 Toyota Sienna

Labor Time: 0.5

Door Latch https://goo.gl/GdHLCi

Toyota Programming Keyless Remote 2 DIFFERENT PROCEDURES √

When I was employed at a Toyota Dealer, from 2005-2012, the service foreman gave us techs these 2 written procedures to program keyless remotes on LATE and EARLY model cars. The first procedure is the more commonly used. Second is for earlier models. TRY BOTH PROCEDURES TO SEE IF IT WORKS ON YOUR CAR. Procedure for LATE models: (MORE COMMON) Start with drivers door open, and all other doors closed. Insert key into ignition and remove it 2 times Close and open drivers door 2 times Insert key into ignition and remove it 1 time Close and open drivers door 2 times Insert key into ignition Close drivers door Cycle key from lock to on 1 time, then remove key from ignition Wait for door locks to cycle 1 time Press lock and unlock buttons on remote at the same time, then press lock button on remote Wait for door locks to cycle 1 time Insert key into ignition, and cycle on then off once Get out of vehicle, close door and test operation If door locks do not cycle, or cycle twice. Then restart procedure EARLY model procedure: Drivers door open all others closed, key out of ignition Insert key into ignition and remove it 1 time Cycle door locks with power lock button from lock to unlock 5 times Close and open drivers door 1 time Cycle door locks with power lock button from lock to unlock 5 times Insert key into ignition and cycle from off to on 1 time Wait for door locks to cycle 1 time Press lock and unlock buttons on remote at the same time and release Press lock button on the remote 1 time Wait for door locks to cycle Insert key into ignition and cycle from off to on 1 time Exit vehicle and test system