Bank 2 Sensor 1 location, 2000 Solara V6 engine

Location of AIR DOOR actuator 1997-2002 Toyota Camry

If you wanted to remove the air door actuator. It is located on the driver side, look way on top of gas pedal.

1. Release the claw and pull out the plate.

b. Remove levers on pins

c. Disconnect the connector.

d. Remove the 3 screws and servomotor

How to test Intake Air Flow Meter/Mass Air Flow Sensor (MAF) 2003-2008 Toyota Matrix Corolla

a.Check the operation.

1.Apply battery voltage across terminals 1 (+B) and 2 (E2G).
2.Using a voltmeter, connect the positive (+) tester prove to terminal 3 (VG) and the negative (-) tester prove to terminal 2 (E2G).
3.Blow air into the mass air flow meter, then check that the voltage fluctuates. If the voltage does not fluctuate, replace the mass air flow meter.

2. Check the resistance.   
3. Using an ohmmeter, measure the resistance between the terminals.

Standard:

If the result is not as specified, replace the mass air flow meter.

Products

1999-2006 Toyota Celica, Oxygen(O2) sensors location

http://astore.amazon.com/lvautoinsider-20

Guide to remove starter motor, 2005 Chevy Classic 2.2L engine 4 Cylinder

1. Disconnect the negative battery cable
2. Raise and support the vehicle 

3. Disconnect the electrical connectors (3,4,5) from the starter

4. Remove the starter bolts.
5. Remove the starter.

2007 Nissan Murano, picture guide/reference to removing high pressure steering hose